The Kamoer X2SR is designed to be used as an automatic water change system for your aquarium. The X2SR takes the headache out of lugging water jugs back and forth when it’s time to do a water change. Water changes are one of the most time-consuming maintenance tasks (and somewhat annoying) for saltwater aquariums owners. Also there has been plenty of debate over what percentage and how often water should be changed. Some people say it should be weekly or bi-weekly, but few argue against daily water changes. Changing 2% of your water every day will greatly increase your tanks stability and greater potential for a long and successful reefing experience.
Like many modern aquarium devices, the X2SR can be controlled remotely through WiFi with the free Kamoer mobile phone App.
The automatic water replenishment function can be completed through the submersible pump interface. To mitigate possible overflow risks, X2SR comes standard with an anti-overflow sensor. When the water level reaches the anti-overflow sensor, an alarm will be triggered, and the water supply and water change will stop giving you extra piece-of-mind.
Basic Parameters
Max Flow: More than 900ml/min
Power Adapter Input: 100VAC – 240VAC
Output: DC24V 1.9A
Number of dosing: 24 times/day-1 time/99 days
Interface: WiFi (App remote control)
Working environment: Temperatures: 0 – 70℃; Humidity: 10% – 90% (non-condensation)
Dimensions (L*W*H): 168*177*223mm (including pump head)
Weight: 4.106KG (not including power supply)
Each X2SR Water Changer comes with everything you need to get started including the following:
Package Contents:
- Power adapter body (DC24V 1.9A)
- Power adapter plug (US/UK/EU/AU)
- Plastic cylinder (50ml)
- PVC tube 9.5*12.5mm; green 6m
- Kamoer tube manifold Transparent
- Float level sensor(headphone plug)
- Float level sensor bracket
- Magnet (black)
- A submersible pump(DC 24V)
- Male-to-male line
- 12 PVC connecting pipe for auto top-off 8*11mm transparent 1.5m
- Anti-siphon connector(1/4 straight)
- Grease ×10g
- Quick start guide
- Qualified certification
Step By Step Instructions:
- The outlet of drain pump, connect to wastewater bucket or drain.
- Inlet of drain pump, connect to the fish tank
- The outlet of refill pump, connect to the fish tank
- The inlet of the refill pump, connect to fresh seawater
- DC24V pump, connect to submersible pump
- Liquid level sensor for detecting whether freshwater is empty
- Liquid level sensor for detecting whether wastewater is full
- Anti-overflow sensor for detecting whether the tank reaches the warning water level
- The liquid level sensor used to maintain the normal water level of the fish tank
- Reset button for configuring the network
- DC24V IN, power input
- Drain pump running indicator
- Power/Wi-Fi status indicator
- Refill pump running indicator
- The button of Drain pump, long-press the button to run
- The button of Refill pump, long-press the button to run
Precautions
★ Please use the product’s own power adapter and work in the specified working environment.
★ This product only supports 2.4G Wi-Fi, not 5G Wi-Fi.
★ Perform flow calibration before using the device to ensure that the water output is the same as the water input when changing water.
★ The connecting pipe for the liquid inlet should be as short as possible, and the connecting pipe for the liquid outlet should be suspended above the tank.
★ Please carefully check whether the connection direction of the water inlet and outlet is correct, and do not connect them in reverse.
The X2SR is selling for $449.99 online and it is imported in the United States though CoralVue. If you are interested in learning more or you are considering an automatic water change device then be sure to visit your local fish store or online dealers including Aquarium Specialty and AquaNerd sponsor Premium Aquatics.
